Otherwise, execute the following: Replace the delivery motor M5. Turn on the power switch. In the case of the GP iR , the orientation of each original is checked for correction, if needed. Correct the connectors and the cable. Turn offf the power switch, and disconnect the following connectors from the relay PCB: The imageRUNNER is a high-volume digital production system that sets new standards for speed, performance, reliability, and document finishing.

Uploader: Kajin
Date Added: 6 April 2015
File Size: 13.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 26675
Price: Free* [*Free Regsitration Required]

ir7200 ir8500 ir105 ir8070 ir9070 ir105+ Laser Scanner Assembly FG6-8579-030

F shows the basic construction of the side paper deck; F shows the basic sequence of operations, while F shows the control mechanism. There is no utility for the OS Version you selected. This high volume copier provides an easy and efficient solution for work groups. Then, generate output by making the following selections to adjust the image front margin: Copy paper 2 Try fresh paper.

Canon Image Runner Copy Guide Manual for Ir | eBay

F 5 Remove the reader controller PCB together with its mounting base. The Canon iR can copy or print up to A3 paper size. Replace the drum unit Developing bias connector 8 Is the connector on the machine rear for the developing bias connected? Copy paper 8 Try paper of a recommended type. This list is updated weekly, so you can always download a new zcanner or update. Does the toner feed motor inside the hopper rotate?


Move the copier to its site of installation, and secure it in place using its adjusters. Mount the lifter motor correctly. The image data comes in four channels: Developing assembly 4 Are the support members of the developing assembly in firm contact with the drum? JB5 Left deck PS Put your finger on the edge of scannr cleaning blade, and feel for a scratch.

Screw Transfer separation charging assembly front cover F 2 Remove the fixing 1 screwand disconnect the connector. Check the sacnner if faulty, replace it: Does the message go ON? Before setting out for a scheduled visit, check with the Service Book, and take parts that are likely to need replacement.

Main power supply 2 Is the rated AC voltage present at the power outlet? The driver may be included in your OS or you may not need a driver. Replace the reader controller PCB Condensation on the optical system e. Slide the scanner fixing to the front to detach. Tape the following in place: Is the density normal? DC motor, 33 W V model: Correct the connector and the cable.


Latest comments Recent People Popular.

Canon FH7-3347-020, Exposure Lamp, IR105, IR600, IR8500, IR9070- Original

While the fixing upper roller is cooling, check the surface of each thermistor for dirt, mounting condition, and connection. The iR will be available in June at a cost of 32, Does the motor M3 rotate?

The service potential may be checked in service mode. See the descriptions on how to check photointerrupters.